RACING GUARDIAN TEMPERATURE CONTROLLER CHT SENSOR ENGINE ALARM OIL WATER °F °C

Description

ENGINE GUARDIAN OVER HEATING GAUGE ALARM FOR OIL or WATER TEMPERATURE with Fahrenheit reading
Displays your true engine temperature and If the engine overheats(alarm set point), the Temp controller will start beeping and also visual guide HHH on the controller screen intermittently to warn the driver.
The heat sensor simply fits like a washer under any suitable bolt that is close to the cylinder head or engine block like under tappet cover bolt or thermostat housing bolt or similar.
If you want to check the radiator temp, you can connect Temperature Sensor to the upper radiator hose too. The sensor detects changes so quickly, drivers can see their engine temperature rise and fall degree by degree (with 0.1 degree resolution) as they drive in varying traffic and road conditions.
you don't even need to know your engines temperature specifications to set the overheating alarm. You simply note the highest temperature your engine reaches during normal driving, then set the audible alarm to go off at a few degrees higher. This controller can be set to alarm at any temperature from -58 to
230
degrees F.
The controller can also use to monitor the temperature of Air Cooled Engines, Transmissions, Gearboxes, Transfer Boxes & Wet Exhausts in fact anything upto 230F for professional racing car and
It can be fitted by any handyman. The main unit fits under the dash (Compact size - 75 (W) x 86 (H) x 35 (D) mm, plus mounting tabs . The power just connect to 12V DC by wire.
The Controller has 3 relay output too (one, first heat set point output and second, heat alarm output with beeper and third, cold set point if you need ),
and you can connect the outputs to any devices that you need run when you have emergency overheating like, control the extra coolers by your controller .so if your cars has two cooler or you installed 2 extra Cooler, you can set one of the coolers to kick lower temperature to give you stable control over your temperature.
This system can help to prevent overheating due to:
- Coolant loss
- Hose leaks
- Malfunctioning thermostat
- Blockage in the radiator or radiator hose and cap
- water pump failure
-Oil system problem
- Air flow restriction
Features:
Large and clear LCD display
Mini and light design
Temperature Range
-58 to 230°F
Dual heating and cooling function
Control temperature by setting the temperature set value and the different value
Temperature Calibration
Wiring diagram for installation included
Temperature Controller Specifications
Temperature Measuring Range:
Control temperature range: -58 to 230F
Control temperature difference: 1 - 25 °F (adjustable)
Auto switch between heating and cooling
High alarm set point with buzzer and Output
Resolution: 0.1 °F
Accuracy: ± 1 °F (-58 ~ 230 °F)
Sensor error delay: 1 minute
Relay contact capacity (Heating): 10
Amp
Relay contact capacity (Cooling): 10
Amp
Compressor delay protection time: 0 ~ 10 minutes (adjustable)
Fahrenheit Reading
Operating Relative Humidity: 20 ~ 85 % (No condensation)
Power Supply: 12 V AC/DC
Power consumption: < 2 W
Cable length: 3 m (near to 10 feet)
Define LS or HS (Lower and Higher set point) between -58 to 230 F
Item dimensions: approx. 75 (W) x 86 (H) x 35 (D) mm (2.95’ x 3.39’ x 1.38’ inch)
Item weight: 180 g
Thermocouple Specification
Measurement range: -58 to 230F
Cable length (L): 10 ft (3m)
Sensing tip material : washer type cupper sensor
Washer inside diameter : 6.2mm
Sensor type: Negative Temperature Coefficient NTC sensor
Wiring work
The unit is panel mount design . This unit is supplied with wiring diagram of how to fix the main unit to your application systems.
One Set Included
1 x Mini-Temperature Controller
1 x Temperature sensor probe with 3m cable
1 x Instruction Manual
Our shipping service is fast for example:
shipping to USA is 3-6 business days
shipping to England and Ireland is 4-7 business days
shipping to other Europe Countries 5-10 business days
shipping to Canada is 2-7 business days
shipping to Australia, New Zealand and Asia takes longer than other countries (17-25 Business days)