-40%

Eagle SIR5956FB Forged I-Beam Connecting Rods/Ross 80555 Forged Piston Sets FORD

$ 343.2

Availability: 58 in stock
  • Manufacturer Part Number: SIR5956FB/80555
  • Brand: EAGLE/ ROSS
  • Warranty: No Warranty
  • Condition: Great Condition with less than 20 hours on them.
  • Returns Accepted: ReturnsNotAccepted

    Description

    Eagle SIR5956FB Forged I-Beam Connecting Rods & Ross 80555 Aluminum Forged Piston Set assemblies for a small block Ford. (Set of 8)
    ALL SOLD TOGETHER!
    USED with less than 20 hours on them.
    Bought them a while back for my ford 408 stroker project but later ended up selling the whole project. Nothing wrong with them. May have a few scuffs around the edges but nothing serious. Very useable still.
    A couple Pistons have exhaust valve marks in them but nothing major. Just a little carbon on top yet they all look like NEW still. Great buy if you need to save money for that budget build!
    DOES NOT COME WITH BEARINGS AND PISTON RINGS!!! PISTONS & ROD ASSEMBLIES ONLY!!!
    Summit Racing Offers these exact parts which can all add up to around ,000. So who ever buys these will be getting a GREAT DEAL!
    PISTONS SPECIFICATIONS:
    Brand: Ross Pistons
    Manufacturer's Part Number: 80555
    Part Type: Pistons
    Product Line: Ross Racing Forged Pistons
    Bore (in): 4.030 in.
    Bore (mm): 102.362mm
    Piston Style: Flat top, with two valve reliefs
    Piston Material: Forged aluminum
    Compression Height (in): 1.757 in.
    Piston Head Volume (cc): +3.00cc
    Wrist Pin Style: Press-fit or floating
    Wrist Pin Included: Yes
    Pin Diameter (in): 0.912 in.
    Piston Ring Thickness: 1/16 in. x 1/16 in. x 3/16 in.
    Piston Rings Included: No
    Quantity: Sold as a set of 8.
    Description: Ross Racing pistons are forged from 2618-T61 aluminum alloy and come standard with many great features, including:
    * Forced piston-pin oilers
    * Double Spirolox pin retainers
    * Valve pockets engineered for oversized valves and modern high-lift cams
    * Fully CNC-machined skirts to deal with high heat and side loadings
    * Radiused domes (on most applications)
    * Balanced to +/- 2.5 grams
    * Aircraft-quality pins
    CONNECTING ROD SPECIFICATIONS:
    Brand: Eagle Specialty Products
    Manufacturer's Part Number: SIR5956FB
    Part Type: Connecting Rods
    Product Line: Eagle SIR I-Beam Connecting Rods
    Connecting Rod Length Center to Center (in): 5.956 in.
    Connecting Rod Beam Style: I-beam
    Connecting Rod Material: Forged 5140 steel
    Connecting Rod Finish: Shot-peened
    Wrist Pin Style: Floating
    Clearanced for Stroker: Yes
    Cap Retention Style: Cap screw
    Connecting Rod Bolt Brand: ARP
    Connecting Rod Bolt Diameter: 7/16 in.
    Connecting Rod Bolt Material: 8740 chromoly steel
    Fastener Yield Strength (psi): 160,000 psi
    Connecting Rod Bolt Head Style: 12-point
    Approximate Connecting Rod Weight (g): 675
    Big End Bore Diameter (in): 2.423 in.
    Pin End Bore Diameter: 0.912 in.
    Big End Width (in): 0.831 in.
    Pin End Width (in): 1.060 in.
    Advertised Horsepower Rating: 500 hp
    Advertised RPM Rating: 7,500 rpm
    Weight Matched Set: Yes
    Remanufactured: No
    Magnafluxed: Yes
    Quantity: Sold as a set of 8.
    Description: Why spend time and money reconditioning your stock rods when you can upgrade to a set of Eagle SIR I-Beam connecting rods for cheaper? They're forged from 5140 steel for outstanding strength and reliability and they come in both press-fit and bushed pin models. Their lightweight design places less stress on the rest of your rotating assembly to increase engine life and better handle high-rpm use. These rods are X-rayed, sonic-tested, magnafluxed, and shot-peened to stress-relieve the metal. They come with 12-point ARP Wave-Lok rod bolts and are weight-matched to within two grams. The big end sizing is controlled by in-house CNC equipment to ensure precise machining and accurate fitment.